Setting up the BudgeTone 101 & 102 for use with FaktorTel.

Step 1

You must first determine what IP address it received. To do this, press the menu button, then the down arrow next to it until the display shows:

        [2] IP Addr

Now, press the menu button again and you will be shown the IP address of your device (e.g. 192.168.0.100)

Step 2

Go to any browser equipped computer on your network and enter the address: http:/// (where is replaced by the address that was given to you in STEP 1.

Step 3

You will be prompted to enter a password, the default is "admin", then click the "Login" button.

Step 4

There are quite a few parameters that must change. They are listed here:

SIP Server: sip.faktortel.com.au
Outbound Proxy: sip.faktortel.com.au
SIP User ID: Enter the faktortel number you were given when you signed up. (Should start with 09)
Authenticate ID: Enter the faktortel number you were given when you signed up. (Should start with 09)
Authenticate Password: Enter the password that you were given when you signed up.
Name: Enter your full name. This will show up as part of your callerid.




Step 5

SIP Registration: Yes



Step 6

NAT Traversal: Yes

STUN server set to: stun1.faktortel.com.au



Step 7

Click on the "Update" button at the bottom of the form.



Step 8

You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".

Step 9

Click on the "Reboot" button at the bottom of the form.



Step 10

Congratulations! Your device should now be setup on the FaktorTel Network.

Once you are confident your device is setup try calling some of our free test service numbers located here