Step 1: Login

Open your web browser ( e.g. Internet Explorer ) and enter the IP address of the router http://10.1.1.1

Enter user name ( admin ) and your password ( default password is " admin " )

Step 2: Server Configuration

Click on Home > Voice

Click on the " Server " radio button and specify the settings below:

Server Address: sip.faktortel.com.au

Server Port: 5060

Service Domain: sip.faktortel.com.au

Outbound Proxy Server: sip.faktortel.com.au

Outbound Proxy Port: 5060

URL Scheme: SIP-URL

User Paramater: none

Initial Unregister: enabled

Register Expires: 900

Session Expires: 180

Min-SE: 180

Session Expires Refresher: uas

Connection: PvC0

Click on Apply when done

Step 3: Configuring a User Agent ( Phone Account )

Select the " User Agent " radio button and specify your account settings.

Set the Following Values:

Same Phone Number: Disable

Line: 1

Phone Number: Your FaktorTel USER ID

Display Name: Your Name

User Agent Port: 5060

Authentication Username: Your FaktorTel USER ID

Authentication Password: Your FaktorTel PASSWORD

Confirm Password: Your FaktorTel PASSWORD

Click on Apply when done

You do not need to modify anything under the " Peer to Peer " section.

Step 4: Telephony Parameters

Select the " Telephony " radio button.

Click on Apply when done

You do not need to modify anything under the " ACR " section.

Step 5: Reboot

To save the settings into the router's memory click on Tools > System

Click on " Save and Reboot " button. Your router will save the settings and reboot.

Once rebooted you should be able to make and receive calls.