Step 1: Login to your Dynalink 1046VW

Open up your web browser.

Log in to the router at its default LAN address of http://192.168.1.1 with its default User Name of admin, default password of admin

Step 2: SIP Basic Settings

Go to Voice

Click SIP Basic

Interface: PPPoE

SIP Transport Protocol: UDP Port: 5060

SIP Registrar Address: sip.faktortel.com.au - Port: 5060

SIP Outbound Proxy: sip.faktortel.com.au - Port: 5060

SIP Proxy Server Address: sip.faktortel.com.au - Port: 5060

Phone: 1

Phone Number: i.e. Your FaktorTel USER ID ( 09xxxxxx )

Caller Name : Your Name

User Name : i.e. Your FaktorTel USER ID ( 09xxxxxx )

Password: SIP password

Step 3: Codec Selection

Go to Codec Option

Select G729a

Step 4: SIP extension settings

Here we configure specific SIP settings for the FaktorTel service.

Encode SIP option with the user agent: Disable

Encode SIP URI with user=phone parameter: Default

SIP Register with Expired Time: seconds ( range: 30 ~ 86400 ): 1800

SIP Session Timer: seconds ( This value must not be less than Min-SE value ): 1800

SIP Min-SE value: seconds ( minimum: 90 seconds ): 1800

Do Not Send My Phone Number: Depends if you want CID blocked

Subscribe Voice Mail Service: Disable

Enable Voice Activity Detection: Disable

Send Telephone Events via: RFC2833 and with payload type 101

Inter-Digit Timeout Value: seconds ( range: 3 ~ 120 ): 6

Dial Timer: seconds ( range: 2 ~ 120 ): 4