Step 1: Updating the firmware

Before you start you must have frimware version 1.00.03 installed.
www.packetman.com.au/download/linksys/WAG54GP2-EU_AnnexA_ETSI_v1.00.03.zip

Step 2: Accessing the Linksys WAG54GP2

Login to the WAG54GP2 using 192.168.1.1 via your web browser

Enter the username: admin and password admin

Go to the Voice menu

Step 3: Accessing the Advanced Settings

Go to the SIP tab

Under the SDP Payload section, change the G729a Codec name to G729 ( i.e. remove the a )

Step 4: Setting up a Time Server

You can configure the Linksys WAG54GP2 to automatically retrieve the current date and time ( Including daylight savings ).
To do this you will need to enter in a NTP server.

Go to the System tab and add the following NTP server

You can use the following DNS: 202.61.12.230, 202.61.13.102

Enter Primary NTP Server: au.pool.ntp.org

Step 5: Setting up Daylight savings

For NSW these settings will work:

Time Zone: GMT+11:00

Daylight Saving Time Rule: start=3/-1/7/3;end=10/-1/7/2;save=-1

Step 6: Proxy and Registration – LINE 1

Go to LINE 1 and add the following authentication information.

Proxy: byo.faktortel.com.au

Use Outbound Proxy: Yes

Outbound Proxy: mel or syd.byo.faktortel.com.au

Register Expires: 900

Display Name: Your Name

User ID: Your FaktorTel USER ID

Password: Your FaktorTel PASSWORD

Use Auth ID: Yes

AUTH ID: Your FaktorTel USER ID

Supported Codec’s: g729a & g711a

Step 7: Audio Configuration

Next, change the Audio Configuration heading.

The following change is required...

Preferred Codec: G711a

Step 8: Dial Plans

( Copy and paste the following dial plan at the bottom of the LINE 1 page )

(*xx|13[1-9]xxxS0|1[38]00xxxxxxS0|190xxxxxxx!|000S0|0011xxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0)

Description:

*xx = special *number dial

13[1-9]xxx = dial pizza numbers etc

1[38]00xxxxxx = 1300 and 1800 numbers

190xxxxxxx! = Disable 1900 numbers (remove ! to enable)

000S0= Fire/Police/Ambulance

0011 = International

[2-9]xxxxxxx = any local number

0[2-9]xxxxxxxx = any interstate numbers

Finally, save your settings and restart the device.