NOTICE:
If you are using firmware version " 5.01.14 " on the NON-VOIP ( just DG834 ) router,
netgear has a known issue where voice traffic is treated as an attack on the network and therefore causes jittery voice.
To rectify this, please contact netgear to downgrade your firmware. Step 1: Accessing your Netgear DG834GV

Open a browser such as Mozilla Firefox

Connect to the broadband voice adapter by typing http://192.168.0.1 in the address field of your browser, and then click Enter.

When prompted, enter admin for the router username, and password for the router password ( in lower case letters ).

Step 2: Configuring your SIP settings

Go to the VoIP settings Page by clicking http://192.168.0.1/setup.cgi
Or copy and paste http://192.168.0.1/setup.cgi?next_file=voice/set_voip.htm into your web browser.

Enter the username: admin, and password: password if necessary

Enter SIP proxy: sip.faktortel.com.au

For the SIP control port enter: 5060

For the SIP local control port enter: 5060

Outbound proxy: sip.faktortel.com.au

For the Outbound Proxy port enter: 5060

Enter RTP start port as: 16384

You can disable VAD for better quality calls ( silent suppression )

Step 3: Configuring your Faktortel Account

Display Name: Your FaktorTel USER ID

Telephone Number: Your FaktorTel USER ID

Username: Your FaktorTel USER ID

The password field will require Your FaktorTel PASSWORD

For the register expires field, enter 900

or the register head start field, enter 843

For the codec field, you can select G711a or G729ab (you must select 20ms packet size)

Step 4: Authentication Details

Display Name: Your name

VoIP Phone Number: Your FaktorTel USER ID

Auth. ID: Your FaktorTel USER ID

Auth. Password: Your FaktorTel PASSWORD

PSTN route rule: Fixed

PSTN route data: Phone 1

Click Apply to save your changes

Re-login to the VoIP page and click Register