Step 1:

You must first determine what IP address it received. To do this, press the menu button, then the down arrow next to it until the display shows:

[2] IP Addr

Now, press the menu button again and you will be shown the IP address of your device ( e.g. 192.168.0.100 )

Step 2:

Go to any browser equipped computer on your network and enter the address: http:/// (where is replaced by the address that was given to you in STEP 1.

Step 3:

You will be prompted to enter a password, the default is "admin", then click the "Login" button.

Step 4:

There are quite a few parameters that must change. They are listed here:

Account Name: faktortel

SIP Server: sip.faktortel.com.au

Outbound Proxy: sip.faktortel.com.au

SIP User ID: Your FaktorTel USER ID

Authenticate ID: Your FaktorTel USER ID

Authenticate Password: Your FaktorTel PASSWORD

Name: Enter your full name. This will show up as part of your callerid.

Step 5:

Click on the "Update" button at the bottom of the form.

Step 6:

You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".

Step 7:

Click on the "Reboot" button at the bottom of the form.

Congratulations! Your device should now be setup on the FaktorTel Network.