Step 1: Accessing your unit

Connect your phone into the PHONE port of your Linksys ATA.

Dial **** then 110#, the SPA-3102 will announce the current IP address

Once you have the IP address of your SPA-3102 you can access the web interface by opening a web browser and typing the following in the Address: http:/ /< IP Address of SPA-3102> For example: http://192.168.1.10

Step 2: Access LINE 1

Go to Voice > Admin Login > Advanced

Click the URL

If a username and password login appears enter username "admin", and your FaktorTel SIP password.

If you decide to lock down the user side of the SPA-3102, the username is "user"

Step 3: Proxy and Registration

Go to LINE 1

NAT Mapping Enable: yes

NAT Keep Alive Enable: yes

Go to the Proxy and registration heading

For SIP proxy enter: sip.faktortel.com.au

OB Proxy: sip.faktortel.com.au

Enter your Display Name: John Doe

For USER ID: enter your FaktorTel USER ID

For the password field, enter the SIP password which was given to you: ( i.e 8174dBGFs )

For AUTH ID: enter your FaktorTel USER ID and set to ENABLE

Step 4: Proxy and Registration

Change the preferred codec to G729a or G711a

Disable silent suppression and select low silence threshold for better quality calls

Copy and paste the following dial plan:

(13[1-9]xxxS0|1[38]00xxxxxxS0|190xxxxxxx!|000S0<:@gw0>|<#,:>xx.<:@gw0>|0011xxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0) Step 4:

SIP Page and you will see to settings please make them the same as below:

Handle VIA received: yes

Handle VIA rport: yes

Insert VIA received: yes

Insert VIA rport: yes

Substitute VIA Addr: yes

Send Resp To Src Port: yes

Use STUN: yes

STUN Server: stun1.faktortel.com.au

Submit all changes by clicking the submit button.