Automatically Setup Your Linksys SPA3102

This menu allows us to automatically setup your Linksys SPA3102 Device.
By doing this we will be overwriting some settings that you may already have configured.
If you are not using a " clean " or " untouched " device, we recommend doing a factory reset before continuing.

STEP 1: Installing the SPA3102 on your network for setup

To setup your SPA3102 device, you will need to have your SPA3102 installed between your ADSL / Cable modem and your computer.
If you have only one computer on your home network, this is FaktorTel's recommended network configuration for optimal call quality.

STEP 2: Factory Resetting the Device

We need to delete all the existing settings on the device in order to set the correct FaktorTel settings.
To wipe your adapter, pick up the telephone handset connected to the SPA3102 then dial " **** 73738# ",
and then " 1 " to confirm.

Your adapter will then reset and be ready for Step 3.

STEP 3: Your Details

Please enter in your FaktorTel USER ID and PASSWORD below and then click "Next"

USER ID Line 1 ( 09xxxxxx ): * Mandatory Field

PASSWORD Line 1: * Mandatory Field