Step 1: Find the V85 IP address

In the 'typical' environment the broadband router will assign IP addresses to the V85.

To locate the V85's IP address : MENU/OK ? View ? Network Value ? IP Address

Step 2: Login to the V85 Phone

Open your Web browser and enter the IP address of the V85 [found in Step 1] in the Address Bar.

You will see the following login window. Type "admin" for both Username and Password and click Enter.

Step 3: Ensure version of firmware is V1.00.01 V85-ENG

Go the "Overview" menu and double check your are running the right firmware version

The version of firmware should be V1.00.01 V85-ENG

Step 4: SIP menu

Enter the following parameters:

Phone Number: Your FaktorTel USER ID

Password: Your FaktorTel PASSWORD

Auth ID: Your FaktorTel USER ID

Local port: 5060

Enter Proxy addr: sip.faktortel.com.au

Use outbound proxy addr: sip.faktortel.com.au

Set RTP port: 16384

Set RTP packet interval: 40ms

Set codec : G729 or G711

Set Reg expire: 3600

Step 5: Checking the System tab

If you are not running the right firmware version, this is the menu where you will need to perform the update.

The version of firmware should be V1.00.01 V85-ENG

Step 6: Configuring a static IP address

You can select DHCP or assign a static IP address depending on how you have your network configured.

FaktorTel recommends that your configure a static IP address for your V85